The furniture has been used for a long time, and the paint film of the furniture will inevitably appear paint peeling and scratches, which will affect the aesthetics of the furniture, especially the new furniture, which is scratched accidentally in life. It will cost a lot of money. At this time, we must find a way to solve this problem, that is, to make up the furniture paint surface to make these furniture shine again.

There are two cases to repair furniture lacquer, one is minor abrasion, and the other is severe cracking.

1. The paint surface is slightly scratched and the paint is repaired. After the furniture is bumped, there may be slight scratches, which affects the beauty of wooden furniture. In this case, measures must be taken to repair the paint. It can be repaired with a corresponding color pen selected according to the color tone of the furniture paint, and then the surface is coated with a layer of colorless and transparent nail polish, which has a very good effect.

2, paint surface bumping, crack treatment paint repair methods paint furniture cracks or damage, repair, according to different paint materials, the use of measures are also different. Carpentry paints are divided into clear oil and mixed oil, and clear oil is divided into ordinary paint and water-based paint, and the treatment methods are different.

A. Oil

Ordinary paint: add water with fine sandpaper over 800 mesh, sand the cracks, clean and then paint the same color paint, and then dry it again.

Water-based paint: Use a special repair wax and apply it carefully.

B. Mixed oil

1. If the paint surface is severely cracked, first remove the cracked paint surface, apply wood paint putty, and polish before painting.

2. If the paint surface is only slightly cracked, it can be polished directly and then painted.

What are the common furniture paint repair tools? 1. Sandpaper: used in repeated grinding, pouring glue, and then sanding to make the filled part absolutely smooth.

2. File: It is used to remove the corners and corners solidified by excess glue after filling, so that the place to be repaired is restored to the original shape, and the excess can be removed directly.

3. Scraper: It is used to polish the wavy area filled by glue, so that the filling part and other parts are absolutely flat. Use a spatula to level the filling position.

4. Cotton pad yarn and steel grit: used for sanding the sandpaper marks or polishing.