As the concept of environmental protection is getting stronger, water-based metal paints are widely used due to energy saving and pollution-free, and the relatively low cost! For example, metal renovation on home improvement such as rusted iron doors, old windows and doors, rusted fences, etc. But many People do not know what is water-based metallic paint, how to paint it?

Introduction of water-based metal paint Water-based metal paint is an international environmental-friendly water-based industrial paint. It uses water as a thinner and does not contain harmful solvents. It will not cause environmental pollution before and after construction, and will not endanger human health. The emitted VOC content is better than environmental standards, and the performance indicators of the product are better than similar solvent-based paints. It is a new environmentally friendly product: no formaldehyde, no free TDL; no benzene, toluene, xylene; No burning, no odor; VOC content is better than environmental standards!

Water-based metal paint construction process 1. Stir the paint evenly before brushing. If the viscosity is high, add an appropriate amount of water, add 5% -10% water and stir well. If there are bubbles, you need to poke the bubbles and let them stand for a while and then brush

2, polish the rusty place, the surface should be flat without detachment;

3. Apply a thin brush directly and evenly in one direction a few times, generally brush 2-3 times (brush to dry after 3 hours)

4. After the intermediate pause or brushing, the tools should be cleaned in time to prevent drying.

Brush painting skills

1. The more water is added, the shallower the paint brush marks, but the hiding power will decrease accordingly, so the amount of water added should be adjusted according to the actual situation

2, compared with before drying, the paint will look whiter and brighter, and better hiding power after it is completely dry!

Precautions for the construction process of water-based metal paint 1. The paint should be protected from water before the film is dry.

2. This product is water-based paint, do not mix with other paints;

3. The construction environment should be selected on sunny days with a temperature of 5-40 ° C. The relative ambient humidity is preferably less than 80%, and it is not suitable for painting under the conditions of 3 ° C and less than 80%.

4. After long-term storage of the paint, slight precipitation may occur, and it should be stirred well before use to avoid uneven color;

5. When multi-layer coating is needed, the surface coating should be applied after the underlying coating is dry.

6. If the paint sticks to the eyes during construction, rinse immediately with water, and go to the hospital for treatment if necessary.